A conduit which will transfer liquid from one place to another. The speed of the transfer varies depending on the liquid's viscosity and how full the pipe is (a fully pressurized pipe moves liquid faster).
A Crescent Hammer can be used to join adjacent Liquiducts. By default, a newly placed Liquiduct will not connect to another Liquiduct with a liquid already inside. To make the connection, simply wrench the appropriate face of either conduit at the junction - a connection will only be made on that side. Alternatively, using a wrench on a Liquiduct which is adjacent to something that liquid can be drained from will convert the Liquiduct to extraction mode. In this mode, simply provide the Liquiduct with a redstone signal and it will extract liquid from adjacent blocks.
If dismantled (Sneak + Activate) with a wrench or a crescent hammer, the Liquiduct will instantly be removed.
Liquiducts can connect to a Railcraft Iron Tank valve, but only if the valve is placed on the second layer of the tank wall.
|Liquid||Capacity per duct||Maximum Throughput||Notes|
|Water||500 mB||100 mB/tick|
|Steam||800 mb||160 mB/tick||This is 160 steam/tick|
|Biomass||500 mB||100 mB/tick|
|Biofuel||500 mB||100 mB/tick|
Capacity can be measured with a multimeter, divide by the length of the liquiduct to get the per-duct value. Maximum throughput can be measured when the liquiduct is full.
|File:Grid Copper Ingot.png||File:Grid Hardened Glass.png||File:Grid Copper Ingot.png|